A reputation stamp is a good funding to mark your instruments as your
personal, particularly should you attend woodworking lessons or work in a
store with others. It’s additionally a great way to stamp your completed
workpieces for posterity.
Most woodworkers, nevertheless, strategy the duty like Thor would possibly.
They increase their hammer excessive and swing a mighty blow towards
the stamp to do the deed in a single whack. And they’re unhappy when
the mark is crooked or too deep or shallow on one aspect.
After 20-something years of stamping my work and instruments, right here’s
how I strategy the duty so I all the time get a crisp and clear mark.
Apply: Earlier than you begin marking your costly instruments
or work, make a couple of apply marks on the tip grain of
totally different species of wooden. Right here’s the method.
Safe the workpiece: It doesn’t matter what I’m marking, I take advantage of
clamps to carry the work upright and over a stable floor, such
as a ground joist or the leg of my workbench. Handscrews are
often an effective way to do that. Clamping the work enables you to use
two fingers for the following step.
Use a heavy metallic mallet: A wimpy wood mallet will not be
the suitable device. Neither is your 16 oz. hammer (often). One of the best
device is a small sledge. I take advantage of one that’s about 2-1/2 lb. (1
Settle the stamp: Together with your off-hand, maintain the stamp on
the work (I wish to stamp finish grain). And transfer your fingers
till the stamp is stabilized on the work and your fingers are
Faucet low and sluggish: Increase the sledge a couple of inches and faucet
the stamp repeatedly. Your blows will probably be much more correct and
much less glancing this manner. And hear. The impression of the sledge on
the stamp will sound totally different when the stamp bottoms out –
it’s a uninteresting thunk.
There are many good locations to get stamps made. I get mine
— Christopher Schwarz